Activated Alumina

AIM-Activated Alumina with its large specific surface area   provides numerous micro-paths. It is ideal to be employed as absorbent, desiccant and catalyst carrier. It absorb polarized molecules and can be used as trace water desiccant and the pole-molecular absorbent and its attracting force is strong for water, oxide, acetic acid, alkali etc. Additionally, The DE fluorinate effect of the activated alumina is really good. It has high strength, low abrasion, no soften in water, no powdery no crack and no expansion. It can widely use in the deep drying of cracked gas, ethylene and propylene, hydrogen-generation, air separation, instrument air drying and fluorine treatment for H2O2, also in the absorbing pollution material, such as H2S, SO2, HF and paraffin in the waste gas, especially in the drinking water DE fluorinate.

Activated-Alumina

Technical Parameter:

Model AIM-Activated Alumina
Appearance White, Sphere, No Odor, Insoluble In Water, Innocuous
Type KA401 KA402 KA403 KA404 KA405
Crystal Type x-p x-p y y x-p
Chemical Composition Al2O3 % ≥93 ≥93 ≥93 ≥93 ≥93
Na2O % ≤0.3 ≤0.3 ≤0.5 0.15-0.3 ≤0.3
LOI % ≤8 ≤8 ≤8 ≤5 ≤8
Bulk Density g/ml 0.68-0.72 0.70-0.75 0.65-0.75 0.70-0.80 0.75-0.80
Surface Area m2/g ≥300 ≥300 260-300 ≥300 ≥300
Pore Volume ml/g 0.30-0.45 0.30-0.42 0.40-0.46 0.4 0.30-0.50
Static Absorption (RH=60%) % Water Absorption Fluorine Absorption Water Absorption Water Absorption Water Absorption
17-19 0.2-0.3 50 50-70 17-19
Active % 56-62
Attrition Loss % ≤1.0 ≤1.0 ≤1.0 ≤0.4 ≤0.8
Crushing Strength (N/Piece) 0.4-1.2mm ≥30
1-2mm ≥40 ≥40
2-3mm ≥70 ≥70
3-5mm ≥150 ≥150 ≥150 ≥150
4-6mm ≥180 ≥180 ≥180 ≥180
5-7mm ≥200 ≥200
6-8mm ≥300 ≥300
8-10mm ≥350
10-13mm ≥350
12-14mm ≥350